Tag Archive for 'How to'

How to Enable AutoAccept on Multiple Exchange 2010 Room or Equipment mailboxes

Published
by
Peter Schmidt
on 29. July, 2010
in Exchange
. 0 Comments

Here is a quick tip on using the Exchange Management Shell to enable Auto Accept on all of your Room or Equipment mailboxes with a single command in Exchange Server 2010.

This is useful when you have just created a bunch of new Room or Equipment mailboxes for a new environment and want to save time configuring the meeting processing settings.

Continue reading ‘How to Enable AutoAccept on Multiple Exchange 2010 Room or Equipment mailboxes’

How to uninstall hidden devices

Published
by
Peter Schmidt
on 24. May, 2008
in Windows
. 0 Comments

Ever had those drivers or devices that just won’t go away even though you’re sure you’ve uninstalled them. Could be a netword card that was replaced and you keep getting warnings that the system insists there is still an adapter installed with the same IP address.

To get rid of unwanted drivers, devices:

  1. Open the “Start” menu and choose “Run…”
  2. Type “cmd” and press enter
  3. At the command prompt, type:
    “set devmgr_show_nonpresent_devices=1”
    and press enter (nothing happens here, which is ok. we just set an environment variable, which enables us to see hidden devices in Device Manager)
  4. In the open “cmd” type “devmgmt.msc” and press enter (This will launch the Device Manager Console)
  5. In the Device Manager Console, select “Show Hidden Devices” from the “View” menu
  6. Expand the various branches in the device tree (e.g. Network Adapters) and look for the washed out icons, which indicate unused device drivers
  7. To remove an unused device driver, right-click the icon and select Uninstall

Be careful though, you should note that non-loaded devices and drivers are “grayed” out, but that doesn’t necessarily mean that you should delete all of them. It’s recommended to only remove items you know you don’t need. Be careful that you don’t change too many devices or you might need to re-activate your Windows installation.

If you accidentally exit the Device Manager Console you will need to start over again at the command prompt.